. for the problem in (1), design a flash converter with 3-bit resolution to represent the 1 khz sinusoid with an amplitude of 5-volt p-p. assume that the sinusoid has 2.5-volt dc level (that is, the signal swings between 0 and 5 volt). use lm339 and priority encoder 74ls148. examine the datasheets for these chips carefully. you may use the design in fig. 1. however, you need to choose the reference level carefully as an incorrect reference level may result in erroneous responses. make sure that you set the reference level in order to accurately represent the signal.
Engineering
Views: 0 Asked: 07-07 02:54:21
On this page you can find the answer to the question of the engineering category, and also ask your own question
Other questions in category
- a device that transforms electrical energy to mechanical energy is a a) transformer. b) magnet. c) g...
- What is a search engine
- which command should be used on a cisco router or switch to allow log messages to be displayed on re...
- Find the initial speed of a cannonball making 45 degrees above the horizontal required to hit a targ...
- Nbel2, i dont know where you've been all this time but i hope you arent missing please respond i hav...
- Global climate and weather patterns are driven by differences in the amount of heat energy in differ...
- Section lines represent surfaces exposed by a cutting plane a. True b. False...
- Replace the black box portion of the circuit with the Norton's equivalent circuit. ______ for the lo...
- What constitutes the maintenance workload and how it is measured?...
- Aluminium alloys find use in aircraft industry because of
